High energy costs for your air supply? Save money with a precise air flow regulation for your aeration tanks? With deltafit you’ll get ready-for-use unit for your supply pipes.

The tried-and-tested ultrasonic flowmeter deltawave is now ready for flow measurement applications in rivers and big channels.

more than 230bar burst pressure makes the new deltawave HD-transducer for flow measurement perfect for hydro power applications and lekage detection systems.

Precise flow measurement is one of the most important topics within sewage purification processes. We are pleased to provide you with tis following Case History detailing the benefits this customer hase experienced through the use of deltawave flowmeter. Naturally, deltawave also covers a wide range of other applications too. Please visit deltawave’s >> product overview for detailed informations.

In this sewage plant, located in west-Germany, the waste water is pumped into the
sedimentation tanks via 3 different 600mm stainless steel pipes after the mechanical cleaning process. All tanks should be charged equally in order to optimize the cleaning process.

Sewage plant - pumping station

All pumps are regulated by the current flow value which must be measured very precisely to ensure a optimal regulation quality.
2 paths in a crossed installation ensure an accuracy of 1% even with very short inlet ways.
The ultrasonic transducers are feed into the pipe through systec’s quick-lock-system (welding stud with ball valve).

Measurement section with transducers

Because of the integrated ball valve, the transdcuers are completely removable under normal operational conditions – a important contribution for the customers process reliability. All 3 pipes are served by only one electronic unit which brings along a fantastic price-performance ratio.
The ultrasonic transducers were mounted onto a complete measurement section.

deltawave unit

The adjustment of the transducers had been done in advance at systec. On-site, the section was just put into the pipe -done.
This arrangement measures according to the IEC41 code which makes the measurement data traceable and transparent. A big advantage especially for measurements which are sensitive or subject to charge.

Flume type: 3x filled pipe, 600mm
Medium: concentrated waste water
Paths: 4 paths for each pipe(2×2 crossed)
Transducer type: 1000 kHz
Mounting: Welding stud with ball valve
Typical flow: 200 m3/h

Please use our free-of-charge online form! We will be glad to send you detailed information about deltawave. But of course we also looking forward to assist you personally >>Find your local representative or contact person.
You will also find some interesting and useful informations in deltawave’s >>product overview